24 Inputs & 16 Outputs I/O Interface Module with option of fuse
Application
Passive cum Relay Interface Module 24 Input & 16 Relay output with option of fuse in each contact used to Interface with Fanuc/Siemens I/O module to field or field devices such as solenoid valve, Contractors etc. Outputs are galvanically isolated through Relays.
Component Specification- Relay: 24VDC Coil, 1 Changeover
- Relay Socket: 1 Changeover PCB solderable type
- Terminals*: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
Technical Specification
General Data
- No. of Channel: 2, 4, 8, 16, 32.
- Test Voltage: 2.5kV, 50Hz, 1Min Input / Output.
- Ambient operating Temp. : Max 60° C.
- Relative Humidity: Max 90% (Non- Condensing).
- Tropicalisation: Lacquer coating on PCB.
- Identification Tag: Provided.
- Mounting: Universal Din Rail Mountable.
- Standard/Approvals:PCB: Type tested STQC, IEC 61373, ANSI IPC 2221 & 2222, MIL 275B
- Terminals: UL/CE & CSA StandardÂ
- Relays: UL/CSA
Input Data
- Operating Voltage*: 24VDC +/- 10%
- Input Current/ Channel: 25mA at 24VDC.
- Protection across Relay Coil: Freewheeling Diode.
- Indication/ Channel: 3mm Green LED.
- Termination on Input Side: Plug in type 50 pin FRC connector.
Output Data
- Contact Type: SPDT (1C/O).
- Max Switching Voltage: 250VAC.
- Max Output Current: 5 Amp at 230VAC/30VDC.
- Snubber/Fuse Protection: Available on request.
- Output Wiring: Pot Free / Wetted (Powered).
- Terminals: Screw type.
- Conductor size: 0.25 - 2.5 sq.mm flexible.
- Insulation Stripping: 7.0 mm length.
Other notes
- Screw less Terminals: Available on request for selective Relay Modules.