Relay Module, AC Coil, 1C/O with option of fuse & LED
Application
Relay Interface Module 1Changeover with Option of fuse & fuse fail Indication used to Interfacing PLC/DCS Digital Outputs to field or field devices. Output are galvanically isolated through Relays..
Component Specification- Relay : 230VAC Coil, 1Changeover Relay
- Socket : 1 Changeover PCB solderable type
- Terminals : Screw type suitable for 2.5Sq.mm conductor
- PCB : Glass Epoxy double side PTH with Lacquer Coating
Technical Specification
General Data
- No. of Channel : Please refer selection chart
- Test Voltage : 2.5kV, 50Hz, 1Min Input/Output
- Ambient operating Temp. : Max 60° C
- Relative Humidity : Max 90% (Non- Condensing)
- Tropicalisation : Lacquer coating on both side of PCB
- Identification Tag : Provided
- Mounting : Universal Din Rail Mountable
- Standard/Approvals : PCB - Type tested STQC, IEC 61373, ANSI IPC 319, MIL 275B Terminals- UL/CE &
- CSA StandardÂ
- Relay : UL/CSA
Input Data
- Operating Voltage* : 230VAC +/- 10%
- Input Current/ Channel : 15mA at 24VDC
- Protection across : Not Applicable Relay Coil
- Indication/ Channel : 3mm Green LED
- Looping : Interchangeable using flexible (Sinking/Sourcing) jumpers
- Terminals * : Screw type
- Conductor size : 0.25 -2.5 sq.mm flexible
- Insulation Stripping: 7.0 mm length.
Output Data
- Contact Type : SPDT (1C/O).
- Max Switching Voltage : 250VAC/DC.
- Max Output Current : 10 Amp at 230VAC/30VDC.
- Snubber/Fuse Protection: Available on request.
- Output Wiring: Pot Free.
- Terminals: Screw type.
- Conductor size: 0.25 - 2.5 sq.mm flexible.
- Insulation Stripping: 7.0 mm length.
Other notes
- Screw less Terminals: Available on request for selective Relay Modules.
- Operating Voltage: Available in 24VAC/48VAC/110AC.